Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Murfreesboro, TN

Clopay Garage Door Track Repair in Murfreesboro, TN

Bent, loose or misaligned tracks straightened, realigned or replaced. Typical cost $150-$400.

When your door needs Clopay garage door track repair, you want it done safely and right the first time. Typical jobs in Murfreesboro, TN cost $150-$400, and you approve the price first. Bent, loose or misaligned tracks straightened, realigned or replaced. We work on Clopay garage doors of every age, from older models to current lines, and carry or can source compatible parts. Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

When to call for Clopay garage door track repair

  • Rollers rubbing or catching at one spot
  • Visible bends, dents or gaps in the track
  • The door wobbles or binds partway up
  • Loose track brackets or bolts

What usually causes it

  • A car or equipment bumping the track
  • Brackets that have worked loose over time
  • Rust at the bottom of the track
  • A door that has partly come off its rollers

Before the technician arrives

  • Look for dents or kinks in the vertical tracks.
  • Check that the track brackets are tight to the wall.
  • Wipe dirt out of the tracks, but don't grease them.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

How we handle Clopay garage door track repair

  1. Inspect the track alignment, spacing and brackets
  2. Straighten or replace damaged sections
  3. Re-plumb and re-level the tracks and tighten all brackets
  4. Check that every roller runs freely
  5. Test the door through full travel

How much does Clopay garage door track repair cost?

$150-$400Typical range, parts & labor
1-2 hoursTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Clopay services

Clopay Garage Door Track Repair in Murfreesboro, TN

Humid air in Tennessee rusts cables, roller bearings and hinges, which makes the door noisy and heavy and eventually makes the opener strain.

Besides Murfreesboro (ZIP codes 37127, 37128, 37129, 37130, 37131 and more), we handle Clopay garage door track repair in Christiana (9.4 mi), Smyrna (11.9 mi), La Vergne (15.9 mi) and Nolensville (17.3 mi). Call (833) 435-8883 to book a visit in Murfreesboro.

Clopay Garage Door Track Repair: frequently asked questions

How much does Clopay garage door track repair cost in Murfreesboro, TN?

Clopay Garage Door Track Repair typically costs $150-$400 including parts and labor, and usually takes 1-2 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Clopay garage door track repair the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Clopay garage door track repair covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Clopay warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Tennessee or Murfreesboro requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Murfreesboro, TN

Hörmann Garage Door Installation

Hörmann is a German manufacturer of residential and commercial doors and openers with North American operations.

Typical $1,200-$4,500

Craftsman Smart Garage Door Opener Setup

Older Craftsman openers with model numbers starting with 139 were built by Chamberlain, so their remotes and parts often match Chamberlain and LiftMaster models from the same era.

Typical $100-$900

CHI Overhead Doors Rolling Steel Door Repair

Rolling steel service doors, curtains, guides and springs repaired.

Typical $300-$1,500

Linear Opener Gear & Sprocket Replacement

Linear openers and remotes are now part of Nice North America. Linear's MegaCode remotes are common on older openers and gate systems.

Typical $125-$275

Genie Remote & Keypad Programming

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $50-$150

Battery Backup Opener Installation

Openers with battery backup so the door works during power outages.

Typical $450-$950

CHI Overhead Doors Garage Door Cable Repair

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $150-$350

CHI Overhead Doors Extension Spring Replacement

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $150-$350

Wayne Dalton Commercial Garage Door Repair

Repairs for commercial sectional, overhead and service doors.

Typical $250-$1,000

CHI Overhead Doors Garage Door Repair

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $150-$450

Allstar Garage Door Sensor Repair

Allstar openers are no longer made. Replacement remotes and many parts are still available, and we'll tell you when replacing the opener makes more sense.

Typical $100-$250

Richards-Wilcox Torsion Spring Replacement

Torsion springs replaced and wound correctly, with high-cycle upgrades available.

Typical $200-$450

Garage door stuck, noisy or broken?

Talk to a garage door technician in Murfreesboro, TN now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote